Source control is the process of finding sources of contamination, then stopping or reducing them before they reach the Lower Duwamish Waterway (LDW). We must ensure that sources of contamination to the LDW are sufficiently controlled before in-waterway cleanup begins. This means we must investigate more than 20,000 acres of land that drains into the river.
Source control includes a variety of actions, such as site investigation and cleanup, business inspections, controlling stormwater runoff and combined sewer overflows, coordination among agencies, and education. Find out how YOU can help keep stormwater clean.
How does pollution get into the river?
Contaminants in the soil and groundwater in the area around the river can find their way into the sediments through storm runoff and other routes (as shown below). The sediments contain a wide range of contaminants due to decades of industrial activity and runoff from urban areas.
Conceptual site model
Source control strategy
Our 2016 Source Control Strategy describes the goals, priorities, and processes for controlling sources of pollution to the LDW. It provides a framework for identifying source control issues and implementing effective controls.
Ecology has defined 24 source control areas. View the Source Control Area Map to read more about the work we've done in these areas.
The short-term goal is to control sources sufficiently to allow in‑waterway cleanup to begin. The long-term goal is to minimize recontamination of the river sediment and restore water quality in the river. However, finding and controlling sources is difficult in an urban environment. Even with aggressive source control, some recontamination will likely occur.
Source Control Work Group
Ecology leads the interagency Source Control Work Group. Much coordination is needed between agencies to control sources of pollution within the 24 source control areas. This group of regulatory professionals meets monthly to share information, discuss strategy, develop action plans, implement source control measures, and track progress.
The Source Control Work Group includes:
- Ecology: Lead for source control at properties that discharge directly to the waterway, as well as at upland contaminated properties.
- City of Seattle: Lead for source control within their storm drain system.
- King County: Lead for source control for discharges to wastewater or combined wastewater and stormwater systems.
- EPA: Provides technical assistance, source control coordination with EPA sediment investigation and cleanup activities.
Upstream to downstream approach
We've determined that the most efficient way to manage site cleanups for source control is an upstream to downstream approach. This reduces the problem of contamination from an upstream site moving into a downstream site that has already been cleaned up.
The 24 source control areas are grouped into upper, middle, and lower reaches. The river flows northward, so the upper reach (upstream) starts in Tukwila, and the lower reach (downstream) ends at the southern tip of Harbor Island.
While we will prioritize site cleanups in the upper reach, we will continue to move forward with our work in the middle and lower reaches.
Lower Duwamish Waterway showing the upper, middle, and lower reaches for source control planning.
Source control implementation plans
As the lead agency for source control, we asked the city of Seattle, King County, and EPA to develop agency-specific implementation plans. These plans will be considered part of the Source Control Strategy following their completion.
The intent of the implementation plans is to:
- Set each agency’s priorities for source control for the near-term (five years).
- Establish long-term expectations for source control activities during and following construction of the in-waterway cleanup under the Record of Decision.
Source Control Status Reports
These reports summarize source control activities conducted by the Source Control Work Group.
They provide an overview of the LDW site, the strategy for controlling sources of pollutants to the LDW, the process for developing Source Control Action Plans, the methods and process for implementing the Source Control Action Plans, issues associated with permitted discharges, and a summary of source control actions during the period of the report.
Ecology and other agencies are engaged in several related efforts that are driven by broader environmental protection and restoration mandates.
This joint Ecology and EPA effort, initiated in late 2014, will develop a watershed-based model to:
- evaluate the cumulative effects of toxic pollution;
- assess the relative contribution of toxic pollution from sources and pathways in the watershed; and
- help prioritize efforts to control the release of pollutants in the watershed.
King County and the city of Seattle started this regional effort in 2014 to coordinate the work in the watershed that is already being done by local, state, and federal agencies to manage habitat restoration, salmon recovery, flood control, public health, economic development, and more.
Ecology’s Hazardous Waste and Toxics Reduction (HWTR) Program develops comprehensive Chemical Action Plans to identify the most dangerous toxic chemicals and ways to reduce or eliminate them. A Chemical Action Plan for PCBs was published in 2015.
Some of the recommendations in these plans may lead to new legislation or rules, which would go through the normal legislative or rulemaking processes. Other recommendations can be implemented by us and other agencies. Examples of these efforts in the LDW include:
- Sampling building materials for PCBs and contributing to a PCB source tracing program compilation.
- Other agencies working in the LDW are contributing information on products that contain PCBs by testing backfill soils, compost, and mulch.
- Expansion of environmental monitoring to identify new areas requiring cleanup. This is a core element of LDW source control and Ecology’s Toxics Cleanup and Water Quality Programs.
Other Ecology efforts to reduce toxics include:
- Testing consumer products for toxic chemicals
- Protecting children through the Children’s Safe Products Act
- Finding safer alternatives to toxic chemicals,
- Reducing the use of toxic substances in industry
- Advancing green chemistry
- Supporting strong toxics policy